Camion atelier avec dispositif de lubrification (système de distribution hydraulique)
Fabrication sur mesure.
Produit de qualité élevée. FABRICATION ALLEMANDE
CAMION ATELIER AVEC DISPOSITIF DE LUBRIFICATION
Le camion atelier mobile avec dispositif de lubrification peut être utilisé pour différents types d’applications. L’atelier embarqué garantit une assistance complète pour différents travaux d’entretien, de réparation et de maintenance.
Équipé d’une alimentation, d’une grue avec treuil, d’un compresseur à air, d’un dispositif de lubrification et d’un ensemble d’outils polyvalents, l’Atelier mobile est adapté à toutes les applications.
Du fait de sa sous-structure rigide et de sa configuration spacieuse, l’Atelier mobile peut être utilisé sur tout type de terrain et présente moins de restrictions concernant le lieu de déploiement.
Dimensions of workshop (outside)
Length | approx. 6 000 mm |
Width | approx. 2 500 mm |
Height | approx. 2 200 mm |
Different dimensions are possible. All trucks and workshop / lubrication containers are custom-made.
Sub frame
The “Special Low-Torsion body mounting system” is recommendable due to their strongness, torsion-resistant design, in particular for “off-road” operation under rough cross-country conditions.
The elastic connections between the truck chassis and the sub-frame provide a torsion-absorbing function. This arrangement absorbs any stresses passing from chassis to body.
The sub-frame is mounted to the truck frame in a way to ensure equal load distribution. Substructure etc. hot-dip galvanized (can be painted on customers request).
Body
Heavy-duty execution made of corrugated steel panels, strongly welded together with inner coating.
The body structure an all other components are designed for ambient temperature of up to 55°C with extreme high humidity (100%).
The floorboard consists on the upper side of additional waterproofed plywood reinforcements and covered with aluminium chequered plate with integrated drainage pipes. On each side of the side-walls, two (2) sliding windows of reasonable size are installed.
Rear opening
Winged rear door, opening 270 degree, to be opened from in- and outside, robust security locking bar and padlock (container type). The door has one window, of reasonable size. Folding stairs, retractable, made of galvanised steel for easy access to generator and welding machine.
Side opening
Winged side door on right-hand side (or left-hand side) of the body with opening 180 degree, to be opened from in- and outside, robust security locking bar and padlock (container type). Door has one (1) window, of reasonable size.
Folding stairs, retractable, made of galvanised steel for easy access to body platform
Electrical installation 24 V. / 220 V. / 400 V.
24V-system is connected to electrical system of the vehicle
Two (2) ceiling lamps each 20W, with separate switches
One (1) outlet 24V inside shelter, mounted on side-wall
Additionally a separate diesel genset 220 V. / 400 V. with complete wiring inside workshop container
Paintwork and finishing
All steel parts are sand-blasted and prime-coated.
Body painted in one RAL colour.
Substructure etc. hot-dip galvanized (can be additionally painted on customers request)
Complete TOOLS and EQUIPMENT List of workshop container
Please see the below PDF
OPTIONS
for the workshop container
- Electrical welding machine
- Oxyacetylene welding
- Plasma MIG welding machine
- Genset with different power
- Centre lathe machine
- Air compressor
- Hydraulic, mechanical or electrical crane or hoist
- High pressure cleaner (cold and warm water, steam)
- Tools cabinets (steel sheet) above, fixed at the container walls (under the container roof, above work bench etc.)
- Workshop-container insulated and air-conditioned or / and heated
- Instead truck with double-cabin longer (or shorter) workshop-container
- Winged side door on right- (or left-) hand side of the body with opening 180 degree.
- Heavy duty hydraulic knuckle boom crane between truck cabin and workshop-container
- Workshop-container executed as a separate unit to be placed independent from the truck
- Special workshop-container for 4x4, 6x6 or 8x8 trucks for extreme off-road application in rough areas
Truck chassis manufactures
This special workshop & lubrication truck can be mounted on truck chassis of the following manufactures:
- Mercedes-Benz
- MAN
- IVECO
- VOLVO
- SCANIA
- RENAULT
- ISUZU
- etc.
Please download more technical details and pictures in the below PDF.
All WORKSHOP & LUBRICATION TRUCKS are custom-made in accordance to your specific requirements. Please contact us and let us know your needs.
Vous avez des questions? Envoyez nous votre demande ou remplissez le formulaire E-Mail s. v. p.
Certains des termes utilisés dans ces pages peuvent être des marques déposées. Ils ont été employés uniquement à des fins de référence et sont, indépendamment de leur caractérisation, propriété des titulaires respectifs.
Sous réserve de modifications techniques.