For the transport and suction of oil, mud, waste-water (sewage) and for high-pressure cleaning.
Volume: approx. 20 000 ltr. (19.000 + 1.000)
High Quality Product. MADE IN GERMANY
20 000 ltr.
Two (2) 19 000 ltr for Sewage / Oil / Mud / Sludge 1 000 ltr for fresh water
Tank body completely hot-galvanised in and out-side
Vacuum Tank with vacuum system
Full rear opening Hydraulic operated rear opening made of 6mm dished plate and fitted with acid resistant sealing gasket. Manual operated tightening bolts to secure the rear opening absolutely tight and pressure/vacuum proofed. The rear opening is supported by heavy-duty hinges and to be opened hydraulically by manual operated pump with double acting hydraulic cylinders. A beaver tail is mounted for a smooth discharge after opening. At the lowest part of the rear dish-end, two (2) flanges mounted.
One flange 4” for suction and one flange 4” for pressure
Fresh-water-tank with Jetting System
Water tank 1 000 ltr. water-tank integrated in main-tank, completed hot-deep galvanised Upper man-hole cover DN550 with ventilation valve, Side-filling via STORZ C coupling Side discharge pipe 2” Level indicator with colour ball for measure the water level, mounted on the right-hand side Access ladder with walkway
High pressure system One (1) high-pressure pump, hydraulically driven by PTO of truck chassis. Hydraulic system with oil-cooler and fan. Capacity, approx.: approx. 50ltr. / min at 150bar
All vacuum tank trucks and vacuum-jetting-flushing tank trucks are custom-made in accordance with your specific requirements.
We can offer truck chassis from Mercedes-Benz, MAN, IVECO, RENAULT, VOLVO etc.